APC Rack PDU 16A/230V 18 C13 2 C19

Varenr.:

AP8858

EAN:

731304277026

Type Rack / Tilbehør

Se hva din månedlige kostnad vil bli ved avbetaling

Kampanje:

Les mer
Nedbetalingstid:	36
Månedskostnad:	916,74

Rack PDU 2G, Metered, ZeroU, 20A/208V, 16A/230V, (18) C13 & (2) C19

APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.

Includes

Installation guide, Rack Mounting brackets, Safety guide, Sample locking IEC power cord, Serial configuration cable

Output

Nominal Output Voltage 200V,208V,230V
Maximum Total Current Draw per Phase 20A
Output Connections (18) IEC 320 C13
(2) IEC 320 C19
Overload Protection No

Input

Nominal Input Voltage 200V,208V,230V
Input Frequency 50/60 Hz
Regulatory Derated Input Current (North America) 16A
Input Connections IEC-320 C20
Acceptable Input Voltage 100-240 VAC
Maximum Line Current per phase 20A
Maximum Input Current per phase 20A

Physical

Net Weight 2.93 KG
Maximum Height 902.00 mm
Maximum Width 56.00 mm
Maximum Depth 44.00 mm
Shipping Weight 4.20 KG
Shipping Height 1124.00 mm
Shipping Width 162.00 mm
Shipping Depth 107.00 mm
Color Black

Environmental

Operating Environment -5 - 45 °C
Operating Relative Humidity 5 - 95%
Operating Elevation 0-3000 meters
Storage Temperature -25 - 65 °C
Storage Relative Humidity 5 - 95%
Storage Elevation 0-15000 meters

Conformance

Regulatory Approvals CSA C22.2 No. 60950,IEC 60950,METI Denan,UL 60950-1,VDE
Standard Warranty 2 years repair or replace
Environmental Compliance RoHS,REACH: Contains No SVHCs,Contains Lithium Battery

Features & Benefits

Availability

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)

Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

An IT-ready, scalable monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)

Agility

Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.

Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.

Design
PDU types	Målte
Rack-kapasitet	0U
Montering	Vertikal
Produktfarge	Sort
Tilkoblingsevne
Antall AC outlets	20 AC-utganger
AC-utgangstyper	C13 kopling, C19 kopling
Innput-forbindelsestype	IEC-320 C20
Output-forbindelser	18x IEC 320 C13 2x IEC 320 C19
Egenskaper
Sertifisering	CSA C22.2 No. 60950,IEC 60950,METI Denan,UL 60950-1,VDE RoHS, REACH
Styringsfunksjoner
Overvåking	Strøm (el), Kraft indikator, Spenning
Energihåndtering
Nominell innputspenning	230 V
AC-inngangsfrekvens	50 - 60 Hz
Belastningskapasitet	3680 VA
Maksimal innputstrøm per fase	16 A
Maksimal totalt strømforbruk per fase	16 A
Maksimal styrke	3680 W
Vekt og dimensjoner
Dimensjoner (B x D x H)	56 x 44 x 902 mm
Vekt	2,93 kg
Datainnpakking
Pakningsstørrelse (BxDxH)	162 x 107 x 1124 mm
Pakkevekt	4,2 kg
Miljømessige forhold
Driftstemperatur (T-T)	5 - 45 °C
Oppbevaringstemperaturomåde (Celsius)	-25 - 65 °C
Relativ luftfuktighet under drift (H-H)	5 - 95%
Lagringsrelativ fuktighet	5 - 95%

APC Rack PDU 16A/230V 18 C13 2 C19